Born to be something else

Special Models

On account of using particular materials or geometry and sometimes even rare techniques, the models below are only available in the form of the examples displayed. They are originally designed and built to meet special needs or desires of some customers, or discovered by chance during various product development processes. We gladly introduce a tiny selection of remarkable outcomes to you.

Let yourself be charmed by their irresistible appeals.



CEDAR


DST201lc


This model is structurally very similar to the DST201l/Sortita  from the Classic line. It distinguishes itself on the latter because of the use of a special large size Alico magnet and the corresponding dimensional & technical adaptations. Please pay attention to the weight and the output of the system.


Body:  Tonewood, Brass, Bone, Nacre

Type:  Moving Coil / Stereo dose, long / 51mm

Wiring:  6N Copper

Magnet:  Alnico special magnet.

Cantilever:  Aluminium 

Contact pins: Pure Copper

Output :  0.5 mV ± 2dB 1KHz/5,6 cm/Sec/45° 

Frequency Range:  20Hz to 35kHz

Channel Sep.:  a>27db / 1kHz

Impedance:  Approx. 16 Ohm

Weight:  Approx.  25±0.5g 

Tracking force:  1,7-1,9g (Recommended1.8g)

Compliance:  12 x 10-6 cm/dyne at 10 Hz

 

Lacote


DST201uc


Seen from the construction form, this model resembles the DST201ub/Euterpe from the progressive Line the most. Through a special application of a powerful Neodymmagnet, the total weight of the system was greatly reduced, thus it could be born as the most lightweight model in our product portfolio.


Body:  Tonewood, Brass, Bone, Nacre

Type:  Moving Coil / Stereo half inch system

Wiring:  6N Copper

Magnet:  Neodymium 

Cantilever: Boron

Contact pins:  Double-hardened pure Silver 

Output :  0.3 mV ± 2dB 1KHz/5,6 cm/Sec/45° 

Frequency Range:  20Hz to 35kHz

Channel Sep.:  a>27db / 1kHz

Impedance:  Approx. 8 Ohm

Weight:  Approx.  7±0.3g 

Tracking force:  1,7-1,9g (Recommended1.8g)

Compliance: 12 x 10-6 cm/dyne at 10 Hz

 

Torres


DST201us


The first pure silver wired design of us. It was born as a silvery counterpart of the Lacote, and subsequently reconfigured with SmCo.

With its remarkable insightfulness without any harshness in the sound, this model enjoyed unexpected large popularity among the audiences in High-End Munich 2022.


Body:  Tonewood, Brass, Bone, Nacre

Type:  Moving Coil / Stereo half inch system

Wiring:  Pure Silver

Magnet:  SmCo

Cantilever: Boron

Contact pins:  Double-hardened pure Silver 

Output :  0.3 mV ± 2dB 1KHz/5,6 cm/Sec/45° 

Frequency Range:  20Hz to 35kHz

Channel Sep.:  a>27db / 1kHz

Impedance:  Approx. 8 Ohm

Weight:  Approx.  7.5±0.5g 

Tracking force:  1,7-1,9g (Recommended1.8g)

Compliance: 12 x 10-6 cm/dyne at 10 Hz

 



TEDESKA STEREO CARTRIDGE LINE UP


TEDESKA BERLIN GERMANY