THe Solid-Core Line

TEDESKA Solid-Core line has its name from the generator construction. In the generator of this line, two elements, the rear part of the cantilever and the coil core are engineered in one piece from a solid material. In conjunction with its nonferromagnetic nature, the electronic circuit of this "air-core" design becomes largely influenced by the type and the quality of the wiring. It definitely isn't a small challenge to finish an immaculate example of this line but hearing its fairylike sound, the work is always worth the hassle. Each of the examples of this line isn’t reserved to show its own delicate tenderness, the typical charm of the low-output cartridge design. For more information about the technique applied, please refer to  FAQ-Technics-Q2

DST201ua

Standard specifications 

Body:  Tonewood, Brass, Bone, Nacre

Type:  Moving coil / Stereo half-inch system

Air core coil generator (FAQ-Technics-Q2)

Wiring:  Pure copper

Magnet:  Samarium cobalt 

Cantilever:  Boron

Stylus: Line contact TEDESKA Shape

Contact pins:  Double-hardened pure silver

Output:  0.2 mV/ 5,6cm/sec/1KHz/45° 

Frequency Range:  20Hz to 35kHz

Channel sep.:  a>27db / 1kHz

Impedance:  approx. 16 Ω

Weight:  approx.11±0.5g

Tracking force:  1,7-1,9g (Recommended1.8g)

Compliance:  12 x 10-6 cm/dyne at 10 Hz

DST201uf

Standard specifications 

Body:  Tonewood, Brass, Bone, Nacre

Type:  Moving coil / Stereo half-inch system

Air core coil generator (FAQ-Technics-Q2)

Wiring:   Pure silver

Magnet:  Samarium cobalt 

Cantilever:  Boron 

Stylus: Line contact TEDESKA Shape

Contact pins:   Double-hardened pure silver

Output:  0.2 mV/5,6cm/sec/1KHz/45° 

Frequency range:  20Hz to 35kHz

Channel sep.:  a>27db / 1kHz

Impedance:  approx. 16 Ω

Weight:  approx. 11±0.5g

Tracking force:  1,7-1,9g (Recommended1.8g)

Compliance: 12 x 10-6 cm/dyne at 10 Hz

TEDESKA BERLIN GERMANY