MONO Cartridges

Please note: All of TEDESKA cartridges are fully handmade in Berlin Germany. The bodies consist of shaped pieces of tonewood (hardwood), camel or cattle bone, brass and nacre. Every readymade is finished using traditional French polish. Due to the use of various natural materials, each of the cartridges is outwardly unique.


Mono Half inch system


Model: DT101u

Body:

Tonewood, Aluminium, Brass, Bone, nacre

Type:

Moving Coil 

Vertical shaft without iron (FAQ-Technics-Q1)

Wiring:

Pure Copper

Magnet:

Samarium cobalt Magnet

Output Voltage: (S/C)***

0.4 mV ± 2dB 1KHz/5 cm/Sec

Frequency Range:

20Hz to 20kHz

Impedance:

approx. 18 Ohm

Weight(S): (S/C)***

approx.10±0.5g

Tracking Force:

2.2-3 (Recommended 2.5 g)

Compliance:

6 x 10-6 cm/dyne at 10 hz

Mono dose Short


Model: DT101k

Body: 

Tonewood, Brass, Bone, nacre

Type:

Moving Coil 

Vertical shaft without iron (FAQ-Technics-Q1)

Wiring:

Pure Copper

Magnet:

Samarium cobalt Magnet

Output Voltage: (S/C)***

0.4 mV ± 2dB 1KHz/5 cm/Sec

Frequency Range:

20Hz to 20kHz

Impedance:

approx. 18 Ohm

Weight(S): (S/C)***

approx.22±0.5g

Tracking Force:

2.2-3 (Recommended 2.5 g)

Compliance:

6 x 10-6 cm/dyne at 10 hz

Mono dose long


Model: DT101l

Body: 

Tonewood, Brass, Bone, nacre 

Type:

Moving Coil 

Vertical shaft without iron (FAQ-Technics-Q1)

Wiring:

Pure Copper

Magnet:

Samarium cobalt Magnet

Output Voltage: (S/C)***

0.4 mV ± 2dB 1KHz/5 cm/Sec

Frequency Range:

20Hz to 20kHz

Impedance:

approx. 18 Ohm

Weight(S): (S/C)***

approx.24±0.5g

Tracking Force:

2.2-3 (Recommended 2.5 g)

Compliance:

6 x 10-6 cm/dyne at 10 hz



***( S-standard / C-custom ) On request medium or high output voltage available. 

In case of custom-made cartridges, the weight is individually adjustable.

All of TEDESKA mono cartridges are constructed on the "air core coil" principle ( FAQ-Technics-Q1 )

All of TEDESKA mono cartridges are compatible with both Diamond (A)  AND Square (B) connections. (Services)


TEDESKA BERLIN GERMANY