High precision Headshell Lead wires

GUTS-C & GUTS-S

Now we introduce you to the GUTS-C with pure copper conductor and the GUTS-S with pure silver conductor, which are made and developed for use in our own lab.

In line with our fundamental principle of cartridge manufacturing, also the GUTS are manufactured fully by hand, with great emphasis on precise engineering, and the use of qualitative materials. Please have a glance at some examples of the materials used.


custom-designed Textil Isolation Textil Isolation
Custom-designed Textil Isolation
Fiberglass Insulated Sleeve
Fiberglass Insulated Sleeve
High-Precision Crimps
High-Precision Crimps
Pure Silver Conductor
Pure Silver Conductor


The textile isolation we use, absorbs the microphonic noises more efficiently as well as ensures higher resistance against abrasions. The separately fitted High-precision crimps for each terminal offer higher connectivity and reliability. 

For detailed information about the products, please refer to the specifications below. 



GUTS-C


  • Dimension

Total Length: 40 ± 0,5 mm

Crimp Cartridge side: Ø 1,25± 0,05mm

Crimp Tonearm side: Ø 1± 0,05mm

Terminal Isolation: Appr.8mm length

Ø 3 ± 0,1mm

  • Material Composition

Conductor: pure copper

Crimps: gold-plated

Wire Isolation: fabric

Terminal Isolations: acrylic resin coated fiberglass insulating sleeve

Color-code: silicon dioxide

  • Weight

Total: Appr.1.5g

GUTS-S


  • Dimension

Total Length: 40 ± 0,5 mm

Crimp Cartridge side: Ø 1,25± 0,05mm

Crimp Tonearm side: Ø 1± 0,05mm

Terminal Isolation:  Appr.8mm length

Ø 3 ± 0,1mm

  • Material Composition

Conductor: pure silver

Crimps: silver-plated

Wire Isolation: highflex dielectric sp. tubing

Terminal Isolations: acrylic resin coated fiberglass insulating sleeve

Color-code: silicon dioxide

  • Weight

Total: Appr.1g



The GUTS are developed and controlled by constant comparisons of the performance with a half inch system and the solo performance of a plug and play system of the same line. In this way, the GUTS are improved with the aim of being something that acts as if nothing exists. 


Example: GUTS-C standard with Ø1 & 1.25mm terminal on left/ GUTS-S custom made with Ø1.25 & 1.25mm terminal on right


PLEASE NOTE

PLEASE BE CERTAIN TO READ THE FOLLOWING NOTICES BEFORE first USE

  • Please make sure that the diameters of the contact pins on your cartridge side as well as those on the tonearm side meet the standard. The precisely manufactured crimps of the both variations of GUTS hardly allow for any flexibility.
  • The wires of GUTS-Copper are quite rigid. Please make two 90° bends per wire before you install them.
  • The conductor of GUTS-S is pure silver wires. As we know about the natural characteristics of the pure silver material, the thin wires are also very impact sensitive. They should be treated with the utmost care. Please use only the end parts/isolated terminals on the wires every time it must be picked up or installed/deinstalled.
  • This Offer is subject to the same warranty service condition as that of cartridges.


TEDESKA BERLIN GERMANY