The “Eins” is the one in German.
As the name suggests, TEDESKA Mono „Eins“ Line is pursuing innocence and transparency. Seen from the construction form, it can be characterized by its nonferromagnetic, vertical shaft generator. With this unique combination of a modern technique with an old school began the history of TEDESKA. The TEDESKA mono EINS line reflects the nature of original TEDESKA sounds the most. For more information about the technique applied, please refer to FAQ-Technics-Q1
DT101u
Body: Tonewood, Brass, Bone, nacre
Type: Moving Coil / Mono half-inch system
Wiring: 6N Copper
Magnet: Samarium cobalt Magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: Approx. 18 Ohm
Weight: Approx.10±0.5g
Tracking force: 2.2-3 (Recommended 2.5 g)
Compliance: 8 x 10-6 cm/dyne at 10 Hz
Contact Pins: Pure Copper
Stylus: Optional 17/25µ (0,7/1Mil)
DT101k
Body: Tonewood, Brass, Bone, nacre
Type: Moving Coil / Mono dose, short /31mm
Wiring: 6N Copper
Magnet: Samarium cobalt Magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: Approx. 18 Ohm
Weight: Approx.24±0.5g
Tracking force: 2.2-3 (Recommended 2.5 g)
Compliance: 8 x 10-6 cm/dyne at 10Hz
Contact Pins: Pure Copper
Stylus: Optional 17/25µ (0,7/1Mil)
Compatible with both the Diamond (A) and the Square (B) connections.
DT101l
Body: Tonewood, Brass, Bone, nacre
Type: Moving Coil / Mono dose, long /51mm
Wiring: 6N Copper
Magnet: Samarium cobalt Magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: Approx. 18 Ohm
Weight: Approx.25±0.5g
Tracking force: 2.2-3 (Recommended 2.5 g)
Compliance: 8 x 10-6 cm/dyne at 10 Hz
Contact Pins: Pure Copper
Stylus: Optional 17/25µ (0,7/1Mil)
Compatible with both the Diamond (A) and the Square (B) connections.
TEDESKA BERLIN GERMANY