The Solid-core Line

The TEDESKA Solid-Core line takes its name from the generator construction. In these cartridges, the rear part of the cantilever and the coil core are manufactured as a single piece from solid material. Combined with its non-ferromagnetic nature of the generator design, the performance of this air-cored system is highly dependent on the quality and type of wiring. Producing a perfect example of this line is a demanding task, but the reward is a delicately nuanced, almost fairy-like sound. Each cartridge in this line not only reveals the finest musical nuances but also embodies the characteristic charm of a low-output system.

Model Name / Type Designation / Categorization

Sellas/ DST201ua/ TEDESKA Sold-Core Line

Body: Tonewood, Brass, Bone, Nacre

Type: Moving Coil / Stereo half-inch system

Cantilever: Boron

Stylus: TMC (Line contact)

Wiring: Pure Copper

Magnet: Samarium cobalt magnet

Output: 0.2 mV ± 2dB 1KHz/5,6 cm/Sec

Frequency: 20Hz to 35kHz

Impedance: approx. 16 Ω

Weight: approx. 11±0.5g

Tracking force: 1.7-1.9 (Recommended 1.8g)

Compliance: 12 x 10-6 cm/dyne at 10 Hz

Channel sep.: a>27db / 1kHz

Contact Pins: Double-hardened pure silver

Special features: Air core coil generator (FAQ-Technics-Q2)

Compatibility: Compatible with TEDESKA Amalfi or standard headshells

Chiffla/ DT201uf / TEDESKA Sold-Core Line