The EINS Line
“Eins” means “the One” in German. As the name suggests, the TEDESKA Mono Eins line pursues innocence and transparency – values that have always stood at the heart of our entire production philosophy. From a constructional perspective, this line can be defined by its non-ferromagnetic vertical-axis generator design. Its fundamental structure recalls the early framework of mono cartridges from a time when they were the one and only for recorded music.
For more information about the technologies applied, please refer to the sections FAQ – Technics (Q1)
Model Name / Type Designation / Categorization
Dux / DT101u / TEDESKA EINS Line
Body: Tonewood, Brass, Bone, Nacre
Type: Moving Coil / Mono half-inch system
Cantilever: Carbon / Vertical shaft without iron
Stylus: 17µ or 25µ Spherical , others on request
Wiring: Pure Copper
Magnet: Samarium cobalt magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: approx. 6 Ω
Weight: approx.10±0.5g
Tracking force: 2.5-3.5 (Recommended 2.8g)
Compliance: 8 x 10-6 cm/dyne at 10 Hz
Contact Pins: Double-hardened pure silver
Special features: Pretensioned axial mono generator
Compatibility: Compatible with TEDESKA Amalfi or standard headshells
Invention-K / DT101k / TEDESKA EINS Line
Body: Tonewood, Brass, Bone, Nacre
Type: Moving Coil / Mono dose, short /31mm
Cantilever: Carbon / Vertical shaft without iron
Stylus: 17µ or 25µ Spherical , others on request
Wiring: Pure Copper
Magnet: Samarium cobalt magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: approx. 6 Ω
Weight: approx.24±0.5g
Tracking force: 2.5-3.5 (Recommended 2.8g)
Compliance: 8 x 10-6 cm/dyne at 10 Hz
Contact Pins: Pure copper
Special features: Pretensioned axial mono generator
Compatibility: Compatible for both the Diamond (A) and the Square (B) connections / Compatible with TEDESKA Amalfi or standard headshells
Invention-L / DT101l / TEDESKA EINS Line
Body: Tonewood, Brass, Bone, Nacre
Type: Moving Coil / Mono dose, long /51mm
Cantilever: Carbon / Vertical shaft without iron
Stylus: 17µ or 25µ Spherical , others on request
Wiring: Pure Copper
Magnet: Samarium cobalt magnet
Output: 0.4 mV ± 2dB 1KHz/5,6 cm/Sec
Frequency: 20Hz to 20kHz
Impedance: approx. 6 Ω
Weight: approx.25±0.5g
Tracking force: 2.5-3.5 (Recommended 2.8g)
Compliance: 8 x 10-6 cm/dyne at 10 Hz
Contact Pins: Pure copper
Special features: Pretensioned axial mono generator
Compatibility: Compatible for both the Diamond (A) and the Square (B) connections / Compatible with TEDESKA Amalfi or standard headshells
Tedeska Lab. Berlin
Custom-tailored Moving Coil Cartridge Design Workshop
— since 2015